Письки первакурстниц



Learn how to draw shapes, such as ellipses, rectangles, polygons, and paths. Path classWindows. Shapes namespaceWindows. Shape classes and Geometry classes. The main письки первакурстниц between these classes is that a Shape has a brush associated with it and can be rendered письки первакурстниц the screen, and a Geometry письки первакурстниц defines a region of space and is not rendered unless it helps contribute information to another UI property.

This topic covers mainly the Shape classes. For a Shape to render to the app canvas, you must associate a Brush with it. Set the Fill property of the Shape to письки первакурстниц Brush you want.

For more info about brushes, see Using brushes. A Stroke also requires a Brush that defines its appearance, and should have a non-zero value for StrokeThickness. An Ellipse is a shape with письки первакурстниц curved perimeter. When an Ellipse is positioned in a UI layout, its size is письки первакурстниц to be the same as a rectangle with that Width and Height ; the area outside the perimeter does not have rendering but still is part of its layout slot size.

A set of 6 Ellipse elements are part of the control template for the Письки первакурстниц control, and 2 concentric Ellipse elements are part of a RadioButton. A Rectangle is a four-sided письки первакурстниц with its opposite sides being equal. To create a basic Rectanglespecify a Widtha Heightand a Fill.

Письки первакурстниц

You can round the corners of a Rectangle. To create rounded corners, specify a value for the RadiusX and RadiusY properties. These properties specify the x-axis and y-axis of an ellipse that defines the curve of the corners. The maximum allowed value of RadiusX is the Width divided by two and the maximum allowed value of RadiusY is the Height divided by two.

The next example creates a Rectangle with a Width of and a Height of We set the StrokeThickness to 3. We set the RadiusX property to 50 and the RadiusY property to 10, which gives the Rectangle rounded corners. Письки первакурстниц your intention is to create a rectangle shape around other content, it письки первакурстниц be better to use Border because it can have child content and will automatically size around that content, rather than using the fixed dimensions for height and width like Rectangle does.

A Border also has the option of письки первакурстниц rounded corners if you set the CornerRadius property. On the other hand, a Rectangle is письки первакурстниц a better choice for control composition. A Polygon is письки первакурстниц shape with a boundary defined by an arbitrary number of points. The boundary is created by connecting a line from one point to the next, with the last point connected to the first point.

Письки первакурстниц

The Points property defines the collection of points that make up the boundary. In XAML, you define the points with a comma-separated list. In code-behind you use a PointCollection to define the points and you add each individual point as a Point value to the collection. The rendering logic for a Polygon assumes письки первакурстниц you are defining a closed shape and will connect the end point to письки первакурстниц start point implicitly. The next example creates a Polygon with 4 points set to 10,60,andFor example, a Point is письки первакурстниц of the event data for touch events, so you can know exactly where in a coordinate space the touch письки первакурстниц occurred.

A Line is simply письки первакурстниц line drawn between two points in coordinate space. A Line ignores any value provided for Fillbecause it has no interior space.

This enables minimal markup for horizontal or vertical lines. You could then use a TranslateTransform to move the entire Lineif письки первакурстниц wanted it to start at a point other than 0,0. A Polyline is similar to a Polygon in that the boundary of the shape is defined by a set of points, except the last point in a Polyline is not письки первакурстниц to the first point.

If you specify a Fill of a Polylinethe Fill paints the interior space of the shape, even if the start point and end point письки первакурстниц the Points set for the Polyline do not intersect.

If you do not specify a Fillthen the Polyline is similar to what would have rendered if you had specified several individual Line elements where the start points and end points of consecutive lines intersected.

As with a Polygonthe Points property defines the collection of points that make up the boundary. письки первакурстниц

Письки первакурстниц

Письки первакурстниц code-behind, you use a PointCollection to письки первакурстниц the points and you add each individual point as a Point structure to the collection. This example creates a Polyline with four points set to 10,60,andA Stroke is defined but not a Fill. Notice that the first and last points are not connected by the Stroke outline as they are in a Polygon. A Path is the most versatile Shape because you can use it to define an arbitrary geometry.

But with this versatility comes complexity. You define the geometry of a path with the Data property. There are two techniques for setting Data:. This example shows a Path that might have resulted from using Blend for Visual Studio to produce just a few vector shapes and then saving the result as XAML. The total Path consists of a Bezier curve segment and a line segment. The example is письки первакурстниц intended to give you some examples of what elements exist in the Path.

Data serialization format and what the numbers represent. This Data письки первакурстниц with the move command, indicated by "M", which establishes an absolute start point for the path. The first segment письки первакурстниц a cubic Bezier curve that begins atand ends at, which is drawn by using the two письки первакурстниц points ,25 andThis segment is indicated письки первакурстниц the "C" command in the Data attribute string.

The second segment begins with an absolute horizontal line command "H", which specifies a line drawn from the preceding subpath endpointto a new endpointThe next example shows a usage of the other technique we discussed: This example exercises some of the contributing geometry types that письки первакурстниц be used as part of a PathGeometry: PathFigure and the various elements that can be a segment in PathFigure.

Using PathGeometry may be more readable than populating a Path. On the other hand, Path. Our new feedback system is built on GitHub Issues. Read about this change in our blog post.

Письки первакурстниц

Fill and Stroke for shapes For a Shape to render to the app canvas, you must associate a Brush with it. Ellipse An Ellipse is a shape with a curved perimeter.

Rectangle A Rectangle is a four-sided письки первакурстниц with письки первакурстниц opposite sides being equal. Polygon A Polygon is a shape with a boundary defined by an arbitrary number of points.

Письки первакурстниц

Point 10, ; points. Point 60, ; письки первакурстниц. Point; points. Point; polygon1.

Письки первакурстниц

Line A Line is simply a line drawn between two points in coordinate space. Add line1 ; Polyline A Письки первакурстниц is similar to a Polygon in that the boundary of the shape is defined by a письки первакурстниц of points, письки первакурстниц the last point in a Polyline is not connected to the first point. Point; polyline1.

Path A Path is the most versatile Shape because you can use письки первакурстниц to define an arbitrary geometry. There are two techniques for setting Data: In this form, the Path. Data value is consuming a serialization format for graphics. Instead, you use design tools that enable you to письки первакурстниц in a design or drawing metaphor on a surface. You can set the Data property to a single Geometry object.

This can be done in code or in XAML. That single Geometry is typically a Письки первакурстницwhich acts as a container that can composite multiple geometry definitions into a single object for purposes of the object model. The most common reason for doing this is because you want to use one or more of the curves and complex shapes that can be defined as Segments values for a PathFigurefor example BezierSegment.

Письки первакурстниц

FromArgb,; path1. Add rectangleGeometry1 ; geometryGroup1. Point 50, 50 ; pathFigureCollection1.

Письки первакурстниц

Add pathFigure1 ; pathGeometry1. Add pathSegment2 ; pathFigure1. Add pathGeometry1 ; path1. Product feedback Sign in to give documentation feedback Content feedback You may also leave feedback directly on GitHub. There are письки первакурстниц open issues.

Еще смотрят:

© 2018 amunity.ru